Home › Products › Industrial Dehumidifiers › Air Handling Unit Type Desiccant (Rotor) Dehumidifiers › Desiccant Dehumidifier TTR 2800
Desiccant Dehumidifier TTR 2800
This dehumidifier operates according to the desiccant principle. This provides not only reliable and high performance at low temperatures, but also allows reaching a lower dew point compared to condensation dehumidifiers.
- Fast delivery across Turkey
- Profesyonel montaj & devreye alma
- Spare parts and after-sales support
Product Details
This dehumidifier operates on the desiccant principle. This ensures not only reliable and high performance at low temperatures, but also enables reaching a lower dew point compared to condensation dehumidifiers.
Thanks to internal heat recovery and electronic regulation of the dry air flow rate, TTR 2800 takes its place among the most cost-effective desiccant dehumidifiers, just like the other TTR desiccant dehumidifiers!
Its robust technology, developed according to industrial standards, makes the TTR 2800 a reliable partner for dehumidification even under difficult conditions.
- Robust units with "made in Germany" quality
- High dehumidification capacity even at low temperatures
- Reliable, washable and mechanically robust silica gel adsorption rotors
- Internal heat recovery
- Electric regeneration heating
Features of the TTR 2800 dehumidifier:
- Steel housing
- Voltage input
- Rotor rotation monitoring (rotor and drive)
- Overheating protection – switchable (air regeneration)
- Operating temperature adjustment (air regeneration)
- Filter monitoring (air flow and warning lamps)
- Duoventic control*
- Adjustable air return (very easy to change)
- External On/Off connections
- Hygrostat connection
- Potential-free contacts (operation, malfunction, filter)
| Technical Information | ||
|---|---|---|
| General | ||
| Product number | 1.110.000.175 | |
| Dry air (at intake air of 20°C / 60% relative humidity) | ||
| Dehumidification [kg/24h] | 376.8 | |
| Dehumidification [kg/h] | 15.7 | |
| Free-blow air volume [m³/h] | 3,150 | |
| Nominal air volume | Dry air (at intake air of 20 °C / 60% relative humidity) [m³/h] | 2,800 | |
| External pressure | Dry air (at intake air of 20 °C / 60% relative humidity) [Pa] | 300 | |
| Inlet connection Ø [mm] | Dry air (at intake air of 20°C / 60% relative humidity) | 315 | |
| Outlet connection Ø | Dry air (at intake air of 20°C / 60% relative humidity) [mm] | 315 | |
| Regeneration air | ||
| Nominal air volume | Regeneration air [m³/h] | 570 | |
| External pressure | Regeneration air [Pa] | 300 | |
| Inlet connection Ø | Regeneration air [mm] | 200 | |
| Outlet connection Ø | Regeneration air [mm] | 200 | |
| Operating principle | ||
| Operating principle | TTR-Trisorp-Dual | |
| Operating range | ||
| min. temperature [°C] | -20 | |
| max. temperature [°C] | 40 | |
| min. humidity [% relative humidity] | 0 | |
| max. humidity [% relative humidity (non-condensing)] | 100 | |
| Electrical values | ||
| Mains connection | 380 – 480 V, 50/60 Hz | |
| Nominal current consumption [A] | 31.7 | |
| Installed power [kW] | 21.6 | |
| Heating capacity [kW] | 18.9 | |
| Recommended fuse [A] | 32 | |
| Electrical connection | ||
| Terminal connection | ||
| high air capacity | ||
| Continuous dehumidification | ||
| Dimensions | ||
| Length (excluding packaging) [mm] | 1,348 | |
| Width (excluding packaging) [mm] | 769 | |
| Height (excluding packaging) [mm] | 1,323 | |
| Weight | ||
| (excluding packaging) [kg] | 250 | |
| Equipment, Features and Functions | ||
|---|---|---|
| Outer housing type | ||
| Stainless steel | ||
| Unit model | ||
| Indoor installation (standard) | ||
| Rental model | ||
| stackable | ||
| Weatherproof | ||
| Equipment | ||
| Wide range | ||
| Rotor rotation monitoring (rotor and drive) | ||
| Manual-reset overheating safety system (regeneration air) | ||
| Operating temperature management (regeneration air) | ||
| Filter monitoring (individual air flow and general warning lamp) | ||
| Duoventic control | ||
| Configurable air direction reversal function (low-cost retrofit) | ||
| Terminals for external ON/OFF | ||
| Hygrostat connection terminals | ||
| Potential-free contacts (operation, fault, filter) | ||
| Operating hours counter | ||
| Air volume monitoring | ||
| Integrated heat recovery unit | ||
| Hygrostat (electronic) | ||
| Hygrostat (mechanical) | ||
| Humidity control | ||
| Humidity and temperature detection | ||
| Sensor-assisted Flowmatic control | ||
| Power consumption meter | ||
| Ammeter | ||
| DIN socket for external ON/OFF | ||
| Regeneration heater type | ||
| Electrical resistance | ||
| Electro-PTC | ||
| Gas | ||
| Saturated steam (4 barg) | ||
| Air pre/post treatment | ||
| Pre-cooling | ||
| Re-cooling | ||
| Pre-heating | ||
| Re-heating | ||
| Portability | ||
| Transport frame | ||
| Braked casters | ||
| Stand casters | ||
| Crane – lifting equipment | ||
| Stacker pockets | ||
Optional Features
This unit can be controlled via a SCADA system. It is not included in standard equipment and is offered as an optional feature.
- Device fault detection via MODBUS RS-485 infrastructure
- Remote control; reading of temperature and humidity values
- Logging of measured values
The unit can perform its own drainage through the drainage point on it. For upward or long-distance water drainage connections, a water pump can optionally be integrated.
Get a Quote for This Product
Would you like to talk right away?
WhatsApp'tan Yaz ☎ +90 507 617 49 59- ✔ Free site survey and sizing
- ✔ Same-day response
- ✔ Installation and commissioning included
How It Works?
Humid air, slowly rotating silica gel coated desikant rotordan passes through; moisture is absorbed by the rotor. A small segment of the rotor is continuously dried with heated regeneration air, and the moisture is expelled through a separate duct. This way eksi sıcaklıklarda bile and operates continuously even at very low humidity targets.
