Desiccant Dehumidifier TTR 5200
Air Handling Unit Type Desiccant (Rotor) Dehumidifiers

Desiccant Dehumidifier TTR 5200

SKU: 1120000141 Delivery from stock / on demand

This dehumidifier operates on the desiccant principle. This not only ensures reliable and high performance at low temperatures, but also enables reaching a lower dew point compared to condensation dehumidifiers.

Ask about this product T-AI assistant responds within seconds
  • Fast delivery across Turkey
  • Profesyonel montaj & devreye alma
  • Spare parts and after-sales support

Product Details

This dehumidifier operates according to the desiccant principle. This allows not only reliable and high performance at low temperatures, but also achieving a lower dew point compared to condensation dehumidifiers.

Thanks to internal heat recovery and electronic adjustment of the dry air flow rate, the TTR 5200 takes its place among the most cost-effective desiccant dehumidifiers, just like the other TTR desiccant dehumidifiers!

Its robust technology, developed according to industrial standards, makes the TTR 5200 a reliable partner in dehumidification even under difficult conditions.

  • Robust units with "made in Germany" quality
  • High dehumidification capacity even at low temperatures
  • Reliable, washable and mechanically robust silica gel adsorption rotors
  • Internal heat recovery
  • Electric regeneration heating

Features of the TTR 5200 dehumidifier:

  • Galvanized and painted steel housing
  • Protection against harsh weather conditions
  • Millennium module
  • Voltage input
  • Rotor rotation control (rotor and drive)
  • Flowmatic air volume adjustment
  • Overheating protection – switchable (air regeneration)
  • Operating temperature adjustment (air regeneration)
  • Filter monitoring (air flow and warning lamps)
  • Duoventic control*
  • Adjustable air return (very easy to change)
  • External connections On/Off
  • Hygrostat connection
  • Potential-free contacts (operation, malfunction, filter)
Technical Information
General
Product number1.110.000.182
Dry air (at intake air of 20°C / 60% relative humidity)
Dehumidification [kg/24h]698,4
Dehumidification [kg/h]29,1
Free-blowing air volume [m³/h]5.800
Nominal air volume | Dry air (at intake air of 20 °C / 60% relative humidity) [m³/h]5.200
External pressure | Dry air (at intake air of 20 °C / 60% relative humidity) [Pa]400
Inlet connection Ø [mm] | Dry air (at intake air of 20°C / 60% relative humidity)500
Outlet connection Ø | Dry air (at intake air of 20°C / 60% relative humidity) [mm]500
Regeneration air
Nominal air volume | Regeneration air [m³/h]1.050
External pressure | Regeneration air [Pa]300
Inlet connection Ø | Regeneration air [mm]300
Outlet connection Ø | Regeneration air [mm]300
Operating principle
Operating principleTTR-Trisorp-Dual
Operating range
min. temperature [°C]-20
max. temperature [°C]40
min. humidity [% relative humidity]0
max. humidity [% relative humidity (non-condensing)]100
Electrical values
Mains connection380 – 480 V, 50/60 Hz
Nominal current consumption [A]60
Installed power [kW]40
Heating capacity [kW]36
Recommended fuse [A]63
Electrical connection
Terminal connection
high air capacity
Continuous dehumidification
Dimensions
Length (excluding packaging) [mm]1.919
Width (excluding packaging) [mm]1.110
Height (excluding packaging) [mm]1.680
Weight
(excluding packaging) [kg]680
Equipment, features and functions
Outer housing type
Steel outer housing, galvanized and painted
Stainless steel
Unit model
Indoor installation (standard)
Weatherproof
Rental model
stackable
Equipment
Wide range
Rotor rotation control (rotor and drive)
Restart-locked overtemperature safety system (regeneration air)
Operating temperature management (regeneration air)
Filter monitoring (individual air flow and general warning lamp)
Duoventic control
Configurable air direction reversal function (low-cost retrofit)
Terminals for external ON/OFF
Hygrostat connection terminals
Potential-free contacts (operation, fault, filter)
Operating hour counter
Air volume control
Integrated heat recovery unit
Sensor-supported Flowmatic control
Hygrostat (electronic)
Hygrostat (mechanical)
Humidity control
Humidity and temperature detection
Power consumption meter
Ammeter
DIN socket for external ON/OFF
Regeneration heater type
Electric resistance
Electro-PTC
Saturated steam (4 bar)
Gas
Air pre/post treatment
Pre-cooling
Re-cooling
Pre-heating
Re-heating
Portability
Transport frame
Braked castor wheels
Trolley wheels
Crane – lifting equipment
Stacking pockets

Optional Features

Remote Monitoring and Control with SCADA

This unit can be controlled via the SCADA system. It is not included in the standard equipment and is offered as an optional feature.

  • Unit fault detection via MODBUS RS-485 infrastructure
  • Remote control; ability to read temperature and humidity values
  • Ability to record the measured values
Water Drain Pump

The unit can perform its own drainage from the drain point on it. For upward-directed or long-distance water drain connections, a water pump can be optionally integrated.

You can contact us to select the equipment suitable for your project.

Get a Quote for This Product

Desiccant Dehumidifier TTR 5200 SKU: 1120000141

🔒 Your information is kept confidential and not shared with third parties.

Would you like to talk right away?

  • ✔ Free site survey and sizing
  • ✔ Same-day response
  • ✔ Installation and commissioning included

How It Works?

1 · Nemli hava girer💧💧💧
2 · Silika jel rotor nemi emer
🔥
3 · Regeneration: moisture is expelled
☀️4 · Very dry air (down to 1% RH)

Humid air, slowly rotating silica gel coated desikant rotordan passes through; moisture is absorbed by the rotor. A small segment of the rotor is continuously dried with heated regeneration air, and the moisture is expelled through a separate duct. This way eksi sıcaklıklarda bile and operates continuously even at very low humidity targets.

Related Products