Home › Products › Industrial Dehumidifiers › Pool Type Dehumidifiers › Pool Type Dehumidifier DH 35
Pool Type Dehumidifier DH 35
TeknoDRY DH 35 stands out in the industrial dehumidifier and moisture remover category with its compact and wall-mounted design. With electronic hygrostat, durable aluminum body and direct water drainage, it is a pool type dehumidifier, wall type dehumidifier
- Fast delivery across Turkey
- Profesyonel montaj & devreye alma
- Spare parts and after-sales support
Product Details
Wall-mounted dehumidifier: Suitable for swimming pools and commercial and industrial areas.
Cataphoresis-coated heat exchangers: Provide high corrosion resistance.
| Product Number | 1125000133 |
|---|---|
| Length (unpackaged) | 885 mm |
| Width (unpackaged) | 265 mm |
| Height (unpackaged) | 720 mm |
| Weight (unpackaged) | 50 kg |
| Cable length | 3 m |
|---|---|
| Mains / frequency | 230 V / 50 Hz |
| Power consumption | 1,04 kW |
| Max. temperature | 40 °C |
|---|---|
| Min. temperature | 5 °C |
| Minimum suitable area size | 4 m² |
| Max. relative humidity | %80 r.F. |
| Min. relative humidity | %40 r.F. |
| CO₂ equivalent | 0,073 t |
|---|---|
| Discharge line pressure | 2,3 MPa |
| Suction line pressure | 0,6 MPa |
| GWP factor | 146 |
| Refrigerant amount | 500 g |
| Refrigerant type | R454C |
| Max. allowable pressure | 3 MPa |
| Installation | Wall mounting |
|---|---|
| Automatic dehumidification | Electronic hygrostat |
| Compressor | Rotary compressor |
| 20 °C / %60 r.F. | 20,2 l/24 h |
|---|---|
| 30 °C / %60 r.F. | 29,3 l/24 h |
| Maximum | 29,3 l/24 h |
Optional Features
This device can be controlled via the SCADA system. It is not included in the standard equipment and is offered as an optional feature.
- Device fault detection via MODBUS RS-485 infrastructure
- Remote control; ability to read temperature and humidity values
- Ability to record the measured values
The device can perform its own drainage from the drain point on it. For upward or long-distance water drainage connections, a water pump can be integrated as an option.
Get a Quote for This Product
Would you like to talk right away?
WhatsApp'tan Yaz ☎ +90 507 617 49 59- ✔ Free site survey and sizing
- ✔ Same-day response
- ✔ Installation and commissioning included
How It Works?
Humid air is drawn into the unit by the fan; as it passes over the cold evaporator surface, the water vapor inside condenses and flows into the tank (or drain) as droplets. The dried air is slightly warmed and returned to the room. Once the room humidity reaches the target level, the hygrostat automatically stops the unit — enerji tasarrufu sağlanır.
