Home › Products › Industrial Dehumidifiers › Pool Type Dehumidifiers › Pool Type Dehumidifier DS 30 (V2)
Pool Type Dehumidifier DS 30 (V2)
Whether indoor swimming pools, spas or jacuzzis – in areas with high humidity levels and condensation, effective dehumidification is essential to ensure customer satisfaction and protect the area against damage.
- Fast delivery across Turkey
- Profesyonel montaj & devreye alma
- Spare parts and after-sales support
Product Details
Whether indoor swimming pools, spas or jacuzzis – In areas with high humidity levels and condensation, effective dehumidification is essential to ensure customer satisfaction and protect the space against damage.
This unit, specially developed for dehumidification in swimming pools, features a high-performance radial fan and a quietly operating evaporator. It stands out thanks to its polyester-coated, corrosion-resistant design and high performance values.
The energy consumed during the dehumidification process is recovered as heat and used for room heating. This process increases the capacity of the unit.
- Hot water heat exchanger for overheating protection,
- Condensate pump max. delivery head: 10 m
- Professional quality "made in Germany" – Original TeknoDRY production
- Units specially manufactured for use at high humidity levels
- Heat recovery feature and high dehumidification capacity
- Low energy consumption, extremely reasonable price
- Corrosion-resistant housing structure, easy cleaning feature
- Very quiet radial fans
- Polyester-coated, corrosion-resistant heat exchanger
- Steplessly adjustable hygrostat
- Adjustable automatic or continuous dehumidification feature
- Optional condensate pump available
| General | ||
|---|---|---|
| Product number | 1.125.000.319 | |
| Dehumidification capacity | ||
| At 20 °C / 60% relative humidity [l/24h] | 20 | |
| At 30 °C / 80% relative humidity [l/24h] | 45 | |
| Max. suitable pool area [m²] | 25 | |
| Air volume | ||
| Stage max. [m³/h] | 700 | |
| Operating range | ||
| Min. temperature [°C] | 0 | |
| Max. temperature [°C] | 40 | |
| Min. humidity [% r.H.] | 30 | |
| Max. humidity [% r.H.] | 90 | |
| Electrical values | ||
| Mains connection | 230 V, 50 Hz | |
| Nominal current consumption [A] | 4.4 | |
| Power consumption [kW] | 0.75 | |
| Current required at start-up [A] | 15.8 | |
| Recommended fuse [A] | 16 | |
| Electrical connection | ||
| Connection plug | CEE 7/7 | |
| Heat loss | ||
| Heat output [kW] | 1.9 | |
| Efficiency (COP) | 2.5 | |
| Heat recovery | ||
| (Max. heat transfer to water) [kW] | 1.4 | |
| Compressor | ||
| Refrigerant gas type | R-407C | |
| Refrigerant gas amount [g] | 500 | |
| GWP factor | 1.774 | |
| CO2 equivalent [t] | 0.887 | |
| Suction side pressure [MPa] | 0.7 | |
| Discharge side pressure [MPa] | 2.7 | |
| Noise values | ||
| Distance 3 m [dB(A)] | 50 | |
| Dimensions | ||
| Length (excluding packaging) [mm] | 265 | |
| Width (excluding packaging) [mm] | 800 | |
| Height (excluding packaging) [mm] | 665 | |
| Weight | ||
| (excluding packaging) [kg] | 46 | |
| Equipment, features and functions | ||
|---|---|---|
| Hygrostat | ||
| internal | ||
| external | ||
| Condensate drainage | ||
| Hose connection possible | ||
| Hose included in delivery scope | ||
| Recommended hose size [mm] | 10 | |
| Condensate pump | ||
| available | ||
| Outer housing model | ||
| Plastic | ||
Optional Features
This unit can be controlled via the SCADA system. It is not included in the standard equipment and is offered as an optional feature.
- Unit fault detection with MODBUS RS-485 infrastructure
- Remote control; ability to read temperature and humidity values
- Ability to record the measured values
The unit can perform its own drainage from its discharge point. For upward-facing or long-distance water discharge connections, a water pump can optionally be integrated.
Get a Quote for This Product
Would you like to talk right away?
WhatsApp'tan Yaz ☎ +90 507 617 49 59- ✔ Free site survey and sizing
- ✔ Same-day response
- ✔ Installation and commissioning included
How It Works?
Humid air is drawn into the unit by the fan; as it passes over the cold evaporator surface, the water vapor inside condenses and flows into the tank (or drain) as droplets. The dried air is slightly warmed and returned to the room. Once the room humidity reaches the target level, the hygrostat automatically stops the unit — enerji tasarrufu sağlanır.
